To setup your first network, first you need to register on our dashboard system.
http://dashboard.ultimatemesh.com

Once the account is established ( takes 2 minutes ) you then add the MAC addresses
of the Ultimate Mesh units you purchased from us into the system. See Dashboard Setup
for extended details.

Once the mac address is added, the system will automatically update the configurations
onto the Ultimate Mesh unit. (takes 30 minutes for complete updates) by simply leaving
the units plugged in , a...
Continue reading ...

The Dashboard is optional configuration utility of a Ultimate Mesh.
 

• Set up your mesh network as per "Basic Ultimate Mesh Setup"
• Open a Dashboard account at www.ultimatemesh.com
• Select Dashboard link
• In the “Getting started: As easy as…” zone
• Select Create link
• Once there, fill in the required information:
• Network Name
• Password
• Email
• Network Location
• Email for notifications
   

To finish registration, press the Create button. You have successfully created your basic management account!

• Add all access...

Continue reading ...

Basic EZ 1-2-3 Ultimate Mesh Setup

• Purchase Ultimate Mesh Hardware <store>
• Make/Test or Purchase Cat 5 Ethernet Cable.
• Plug Ethernet port of Access Point into DHCP server/xDSL Router /Cable Modem Router
• Wait for Access Point update (1/2 - 1 hour)
• Access Point is now ready to use as a gateway node.
• For additional repeater nodes follow the above procedure then unplug Ethernet cable and reboot router

Continue reading ...